|
Post by Andrew & Cherie on Feb 8, 2012 18:56:43 GMT
When fitting AP Calipers , as an upgrade , do the Bolts from standard calipers fit. Same for fitting Brake Hose is the Banjo bolt identical.
|
|
|
Post by Jerry & Di on Feb 8, 2012 19:14:44 GMT
Yes and yes. Not normally a problem I have had a few long banjo bolts, but careful trimming ensures sufficient thread engagement. New washers are needed really, but I've never had any problems over the years
|
|
|
Post by petevick on Feb 9, 2012 8:56:20 GMT
you will need new (longer) caliper/hub bolts, the banjo should fit without issue.
|
|
|
Post by Andrew & Cherie on Feb 9, 2012 16:49:12 GMT
New caliper/hub bolts ordered plus washers for Banjo. Nobody seems to have stock of Banjo bolts. Anyone have a description and size? May as well fit new , as I've managed to acquire NEW AP Calipers.
|
|
|
Post by Jerry & Di on Feb 9, 2012 22:27:22 GMT
I fitted multispoke 16" wheels with 3mm spacers and a little filing of the calipers to get a bit more clearance. They were no problem while they were on the car.
|
|
|
Post by petevick on Feb 10, 2012 9:06:09 GMT
the banjo bolts are M10 x 1.0 x 25mm long (measured under the head)
|
|
|
Post by Andrew & Cherie on Feb 10, 2012 12:20:21 GMT
Thanks , Pete. I'll probably pick up some at our firm's fastener supplier.
|
|
hobby
Junior Member
hobby
Posts: 34
|
Post by hobby on Feb 10, 2012 21:42:31 GMT
New caliper/hub bolts ordered plus washers for Banjo. Nobody seems to have stock of Banjo bolts. Anyone have a description and size? May as well fit new , as I've managed to acquire NEW AP Calipers. I got AP's over to Ire from Martin Smith S / H. what you pay for the new ones??
|
|
|
Post by Andrew & Cherie on Feb 11, 2012 6:26:44 GMT
£250 off e-bay and they are brand new , never been fitted. Can't resist a bargain. Price included pads.
|
|
|
Post by Jerry & Di on Feb 13, 2012 8:47:47 GMT
Funny, I had the front calipers off yesterday and the bolts from the original calipers were fine, full length etc I might invest in some stainless banjo bolts if I can find any.
|
|
hobby
Junior Member
hobby
Posts: 34
|
Post by hobby on Feb 14, 2012 0:17:09 GMT
£250 off e-bay and they are brand new , never been fitted. Can't resist a bargain. Price included pads. You did well I paid that for SH. I gave them a coat of caliper paint to refresh and their lookin good ;D Attachments:
|
|
|
Post by Andrew & Cherie on Feb 14, 2012 4:28:57 GMT
Jerry , could only find plated Banjo bolts but have a spare set. Can fetch them next Tuesday , if they are of any use to you.
|
|
|
Post by Jerry & Di on Feb 14, 2012 16:34:16 GMT
Jerry , could only find plated Banjo bolts but have a spare set. Can fetch them next Tuesday , if they are of any use to you. Thanks, but no thanks Andrew. I paint everything anyway, and peeling plating isn't much good. Stainless seems best if I can find some
|
|
|
Post by petevick on Feb 14, 2012 18:02:21 GMT
I'm sure CJJ fitted SS banjo's when he fitted his braided hoses
|
|