|
Post by jay on Mar 17, 2007 19:11:36 GMT
Bob's coming along nicely now.
Managed a bit of re-cycling today!!!!! Put Cassie's old cloth seats in Bob. Took abit of welding and fabrication to get them to fit but i'm well happy with the results - alot better than the split and knackered old Zuke seats that were in her.
Was hoping that my new indicators/sidelights would arrive today, but the postie didn't deliver. OH well, I'm off all this week again - more holiday I had to take - so when they do arrive I can get them on her and then cut the old bumper over-riders off!!!!
Here's a couple of pics:
|
|
|
Post by Mike H on Mar 17, 2007 19:48:53 GMT
Down our way, BOB is a local brew, being the acronym for Brand Oak Bitter - and very nice it is too (probably much like Jays second Beast (apart from the pink head restraints ;D ))
|
|
|
Post by SWMG Admin on Mar 17, 2007 20:49:57 GMT
Had to have a little chuckle re head pinkies he he hope you don't mind Jay, gotmto say you do work hard on your projects, well done, Dave ;D
|
|
|
Post by jay on Mar 17, 2007 21:07:43 GMT
Had to have a little chuckle re head pinkies he he hope you don't mind Jay, gotmto say you do work hard on your projects, well done, Dave ;D LOL - the head pinkies used to be in Cassie - thought i'd binned them but found them still attached to the seats in the attic.
Thanks - I feel absolutely knackered now after today. Gonna try to re-fabricate the moutings for the bull bar tomorrow - so I can lift it clear to improve the approach angle. Wish the new lights had arived today then the rear bumper could have been removed - got a nice scaffold pipe to replace the thin, tin-worm ridden rear one.
|
|
|
Post by jay on Mar 18, 2007 18:44:07 GMT
Another prosperous day with BOB!!!!
1) Cut the front bumper mounts off 2) Temporarily mounted the sidelights/indicators on the bull bar - got new L***R**** indis/sides/brakes coming - hopefully tomorrow to fit in the ends of the wings level with the side lights back and front. 3) Removed the anti-roll bar at the front to let the springs have more travel 4) Welded up a 'bolt-in' doggy gaurd to keep 'stinky' stella in the back where she belongs - so my seats stay lovely and clean(ish)5) Split my overalls 'big styleeee' right round the crutch and I am absolutely black as black can be. Shower then food me recons - followed, nopepre-ceeded by a stiff alcholic beverage!!!!!! Prob vodca/coke - LOL. Not working tomorrow - or all this week, so I CAN drink - he he he he.
More pics tomorrow once my new lights etc arrive and I get them fitted - plus Stella gets her first ride out in her tomorrow - can't wait.
|
|
|
Post by jay on Mar 19, 2007 20:23:49 GMT
OK - quick update. Nowt done as my new lights DIDN'T arrive today - hopefully tomorrow. Anyways - any excuse for a piccy and Cassie got 'snapped' as well - she was getting jealous.
NO prizes for guessing who has the greatest ground clearance!!!!!
|
|
|
Post by SWMG Admin on Mar 19, 2007 22:10:43 GMT
Bob is like my F was before i had lowering knuckles fitted ;D
|
|
|
Post by jay on Mar 20, 2007 16:39:21 GMT
OK - new front lights fitted today - in between running back and forth from the warmth of the house to get the use back of my frozen fingers - GOD AINT IT COLD???
Anyways - pic.
Rear lights to go in tomorrow - gotta fabricate a new bumper up out of 3mm plate and scaffold tube - should be pretty solid though
|
|
Greyfox
Senior Member
Greyfox
Posts: 470
|
Post by Greyfox on Mar 21, 2007 21:03:10 GMT
looks good well done
|
|
|
Post by shadow on Mar 22, 2007 10:49:30 GMT
Looking good Jay! Just needs pink paint job with cherry red strips & matt black wheels. I'm getting in touch with my feminine side!!! leave me alone!!
|
|
|
Post by jay on Mar 22, 2007 11:01:43 GMT
Looking good Jay! Just needs pink paint job with cherry red strips & matt black wheels. OK then - we all know who to blame when it turns up in these colors then!!!!!!! Won't be for a while though as severely over-stepped the mark on spending this month - LOL!!!!
BUT.................Pink with Black wheels does sound good - PMSL.
|
|
|
Post by jay on Apr 1, 2007 20:20:07 GMT
Finished me new rear bumper this week. The old one had returned back to its earthly composites - ie: the tin worm had been and moved on - it was that bad.
So, after raiding the attic and 're-cycling' parts from an old York Weight's bench, I built this:
Before:
After:
|
|