Guvs

[Guvs]

Well about time I started putting some of my mods up for public viewing I hope my IT skills are good enough to post the photos that go with them

One of the first things I did was put anti roll hoops on.
One of the next was my now famous "fog lights but not fog lights"
long story you can read about how these came about in the photo gallery

The next thing was my hot air blower for when the hard top comes off, and no more heated rear screen, so went to BAS and go another rear screen electrical block connector attached it to the blower and now works off the heated rear screen switch on the dash.

Next two rear parking censor's, you can just see one of them just above and to the left of the exhaust on the right

and the last one for tonight the tonnaeu cover I had to butcher so that it would fit over my hoops.

[SWMG Admin]

Very good Guvs ;D

[scott]

your going to the darkside steve ;D

[mitchell1964]

some great jobs done there mate.

[Guvs]

I have only today been informed that my long awaited wind breaker has arrived for me in work, I have given up tying to get a standard wind stop to fit due to having Xpower slopping anti roll hoops fitted, so I had a cunning plan and designed a ply board wind brake that could be used with this type of hoop fitted, at the moment I only have photos of the template that I made as a tester for fitments and efficiency, and both get a tick in the box.
As soon as I have drilled a few holes and fitted it I will post it in all it's glory, till then I will post the cardboard cut out one, total cost for the prototype is £62.00.
PS cant seem to load photos Dave did say yesterday there was a problem.
Steve (Guvs)

[SWMG Admin]

Sorry about the photo host thing, i have found out that Image Shack the host has changed code for this and i have found a code that just about put it right and get's back to what hosting did before
BUT after you have chosen and clicked the image you want to put on you will see a little box come up shown below,don't worry by this message just click yes to continue where i have highlighted in red and you will come to next page where you can click the little spots on left to host photo,Dave

[Guvs]

Thanks Dave In work at the moment will try it when I get home tonight.
Steve (Guvs)

[gordonevans]

Well done Steve. I do like the censor`s as It`s been on my mind for some time to have some fitted. Were they much of a hassel to fit ? I notice most of your mods improve safety in the car. Has to be good. Well done mate.

[Guvs]

Here are a few photos of my new patented wind breaker orders being taken now for all of you out there that have Xpower anti roll hoops.

[Fast Jan]

That looks really good - much better than they ply wood!!

You could sell them dead easy I reckon ;D

[Guvs]

Here is the Mk1 version bit of a blind spot

[SWMG Admin]

I like the green colour coded glass idea and logo ;D
any chance of a photo from back as difficult to judge size cos i'm just wondering and only wondering if it could be just a tad smaller,glass to edge of hoops kind of thing ,Dave

[Guvs]

I had to get the boys from our ops room to post the last few photos, there has got to be an easer way of up loading photos, he has shown me twice now so here goes I'll try and post a few more.





By George I think I've got it.

[scott]

that looks great steve a very nice job mate ;D

[SWMG Admin]

Well done on hosting photo's Guv's that just leaves Greyfox and Andrew now ha ha